User Service Guide, Fourth Edition - Server Expansion Unit

Chapter 5
Removal and Replacement
Removing and Replacing the Top Cover
45
Removing and Replacing the Top Cover
It is necessary to remove and replace one or more of the covers to access the components within the SEU
chassis.
CAUTION Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
safety precautions could result in damage to the SEU.
Figure 5-3 Top Cover
Removing the Top Cover
Step 1. Loosen the blue retaining screws securing the cover to the rear of the chassis.
Step 2. Slide the cover toward the rear of the chassis only until the cover front clears the top front lip under
which it is located.