Manualshelf

User Service Guide, Fourth Edition - Server Expansion Unit

ManualsBrandsHP ManualsComputer AccessoriesHP BL c-Class SB40c PCI Express Mezzanine Pass Thru Option Kit
71727374757677787980
Chapter 5
Removal and Replacement
Removing and Replacing a Disk Drive
53
Removing and Replacing a Disk Drive
The disk drives are located in the front of the chassis. Unless mirroring is used, the nPartition must be shut
down to remove or replace the drive that serves as the boot disk. Refer to “Shutting Down nPartitions and
Powering Off Hardware Components” for more information. The remainder of the internal disk drives are
hot-pluggable.
CAUTION Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
safety precautions could result in damage to the SEU.
Figure 5-10 Disk Drive Location
Removing a Disk Drive
Figure 5-11 Disk Drive Detail