User Service Guide, Fourth Edition - Server Expansion Unit

Chapter 5
Removal and Replacement
Removing and Replacing a PCI Power Supply (Brick)
63
Removing a PCI Power Supply (Brick)
Figure 5-17 PCI Power Supply Detail
Step 1. Remove the bezel.
Step 2. Securely grasp the handle on the front of the power supply.
Step 3. Slide the blue thumb latch to the right to release the catch.
Step 4. Pull the module out of the chassis.
Table 5-3 PCI Power Supply LED Indications
LED LED State Meaning
Power LED (Green) Off Power module failure or the power to
the respective I/O chassis is OFF.
On Normal operation
Fault LED (Multi-color) Off Normal operation
Blink amber Over temperature condition internal
to supply
Amber Imminent failure detected
Blink red Module internal failure