HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters User Guide

Installation and configuration 18
12.
Windows formats the iSCSI target and then begins copying files to the iSCSI target. During this
phase a secondary setup may appear prompting for disk 1 and disk 2 again.
13. If the following window appears, insert disk 1 and press Enter.
14. If the following window appears, insert disk 2 and press Enter.
Windows Server 2003 continues installing on the iSCSI target.
Post installation procedures
After the CD installation, complete the following steps.
1. Boot the server over iSCSI from a target boot disk.