HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters User Guide

Troubleshooting 22
The initiator is able to connect to and log in to the target and the system recognizes the disk but you are
unable to install the operating system.
Possible causes:
• There are multiple HP Multifunction Gigabit Server adapters (NC37xx, NC38xx) adapters enabled
in the system
• The drivers are not being loaded in the right order during installation
• The target disk provided is not large enough
• The initiator is not configured with the correct LUN from which to boot (some targets start numbering
data devices at 1 not 0)
• The target is not configured to allow access to the specified LUN by the initiator