HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters User Guide

Overview 5
• Windows Server 2008 x64
• Windows Server 2003 (SP2 or later)
• Windows Server 2003 x64 (SP2 or later)
Supported hardware
• Servers. ProLiant servers (ML, DL, and BL p-Class or c-Class) that include an iLO (integrated Lights
Out) or RILOE (remote insight lights-out edition) management devices with a minimum of 512 MB
memory with any of the supported operating systems.
• Adapters. The following Multifunction Gigabit Server Adapters are supported.
o HP NC370T PCI-X Multifunction Gigabit Server Adapter
o HP NC370F PCI-X Multifunction Gigabit Server Adapter
o HP NC373F PCI Express Multifunction Gigabit Server Adapter
o HP NC373T PCI Express Multifunction Gigabit Server Adapter
o HP NC370i PCI-X Multifunction Gigabit Server Adapter
o HP NC371i PCI-X Multifunction Gigabit Server Adapter
o HP NC373i PCI Express Multifunction Gigabit Server Adapter
o HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter for c-Class BladeSystem
o HP NC374m PCI Express Dual Port Multifunction Gigabit Server Adapter
o HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter
• Targets. All Microsoft certified iSCSI targets are supported, including the following HP controllers
and storage systems:
o HP StorageWorks 1510i Modular Smart Array
o HP StorageWorks All in One Modular Smart Array
o HP StorageWorks MSA2000i Modular Smart Array
Required software
Unless indicated otherwise, the following files are packaged with the HP iSCSI boot for Windows SoftPaq
downloadable from the HP website (http://www.hp.com).
• HP Gigabit Server Adapter Firmware Upgrade Utility for c-Class BladeSystem (ccfwupg1.bat)
• Microsoft Windows Automated Installation Kit (AIK) file (6001.18000.080118-1840-kb3aikl_en.iso)
for Windows Server 2008 installations
• HP iSCSI Boot Configuration tool for Windows Server 2003 (hpibootcfg) to set iSCSI boot
configuration parameters (EVs) or the DOS based tool EV.exe
The following software must be downloaded or requested from Microsoft:
• Microsoft iSCSI Software Initiator Version 2.06 (http://www.microsoft.com/downloads) or later
• Microsoft Storport Driver update: KB943295 (http://support.microsoft.com/kb/943295)