Windows Integrity Management Agents Reference

Event DescriptionEvent SeverityEvent ID
Component: NIC SNMP Management Agent Error: The agent could not deliver trap
%1. Cause: The agent was unable to use Asynchronous Management to deliver a
trap. This can be caused by a failure in the Remote Access Service or by a missing or
invalid configuration. Use the Insight Agent control panel to verify the Asynchronous
Management configuration settings. Use the Network control panel to verify the
Remote Access configuration. If this error persists, reinstalling the Insight Agents or
the Remote Access Service may correct this error. For more information, refer to the
Insight Asynchronous Management documenation.
Informational1040
Connectivity has been restored for the NIC in slot %1, port %2. [SNMP TRAP: 18011
in CPQNIC.MIB]
Informational1288
Connectivity has been lost for the NIC in slot %1, port %2. [SNMP TRAP: 18012 in
CPQNIC.MIB]
Warning1289
Redundancy has been increased by the NIC in slot %1, port %2. Number of functional
NICs in the team: %3. [SNMP TRAP: 18013 in CPQNIC.MIB]
Informational1290
Redundancy has been reduced by the NIC in slot %1, port %2. Number of functional
NICs in the team: %3. [SNMP TRAP: 18014 in CPQNIC.MIB]
Informational1291
Server Agent Events
Event DescriptionEvent SeverityEvent ID
The Server Agents service detected an error. The insertion string is: %1. The data
contains the error code.
Warning256
The Server Agents service could not allocate memory. The data contains the error
code.
Warning257
The Server Agents service could not register with the Service Control Manager. The
data contains the error code.
Warning258
The Server Agents service could not set the service status with the Service Control
Manager. The data contains the error code.
Warning259
The Server Agents service could not create an event object. The data contains the
error code.
Warning260
The Server Agents service could not open registry key "%1". The data contains the
error code.
Warning261
The Server Agents service could not start any agents successfully.Warning262
The Server Agents service could not read the registry value "%1". The data contains
the error code.
Warning263
The Server Agents service could not load the module "%1". The data contains the
error code.
Warning264
The Server Agents service could get the control function for module "%1". The data
contains the error code.
Warning265
The Server Agents service could not initialize agent "%1". The data contains the error
code.
Warning266
The Server Agents service could not start agent "%1". The data contains the error
code.
Warning267
The Server Agents service could not stop agent "%1". The data contains the error
code.
Warning269
The Server Agents service could not terminate agent "%1". The data contains the
error code.
Warning270
Server Agent Events 115