Configuring the Embedded 1068 Boot Controller (Windows Server 2008)

Figure 1-16 EBSU screen
19. Select Exit the Configuration Utility and Restart to return back to the EBSU Main menu.
Procedure #2: Load the OEM Boot Driver and Install Windows
To load the OEM boot driver and install Windows, complete the following steps:
1. Boot the server with your Smart Setup media in the DVD-ROM drive. It may take a minute
or two for the disk to initialize, so please be patient.
2. The following text displays, where <version number> is the EBSU version number and
<n> is a timer that counts down from 5 to 1.
EFI-Based Setup Utility Version v<version number>
Copyright (c) 2003 Hewlett-Packard Development Company, L.P.
Portions Copyright (c) 2000–2003 LSI Logic Corporation. All rights
reserved.
EBSU will start in <n> seconds...
3. When the timer runs out, the EBSU Welcome screen displays.
Figure 1-17 EBSU Welcome screen
4. Press Enter to continue, and the EBSU Main menu displays.
Configuring the Embedded 1068 Controller 15