HP A8002A PCI-e Single-Port 4Gb FC adapter and A8003A PCI-e Dual-Port 4Gb FC Adapter for Linux and Windows Systems Installation Guide

Table6Jumpersettings(Port0andPort1)

PCI identiﬁer

P0_JX (Port 0) P1_JX (Port 1)

FE00 1–2 1–2

FE01

3–4 3–4

1AE5

5–6 5–6

NOTE:

Without a jump

er, the HBA reports a device ID of 1AE5. Most software drivers require a PCI device ID of

FE00 to properly identify and control the HBA. Do not attempt to operate the HBA with the PCI device ID

set to 1AE5 unless recommended by the driver installation instructions.

Figure 3 shows the jumper settings.

Figure 3 Jumper settings

A8002A PCI-e single-port 4Gb FC adapter and A8003A PCI-e dual-port 4Gb FC adapter for Linux and

Windows systems installation guide