BladeSystem p-Class Dual Power Input Kit for Mini Bus Bars Installation Instructions

Installing the access cover on the
dual power box
IMPORTANT: The access cover fits properly only if the
cables are installed correctly.
Removing the mini bus bar cover
WARNING: Power to a
ll components must be
off. Before beginning installation of this option, be
sure that the power enclosure and hot-plug power
supply LEDs are not illuminated.
Connecting the dual power box
cables to the mini bus bar
Reinstalling the mini bus bar cover
Repeat the preceding steps for the second mini bus bar.
Securing the mini bus bars
Completing the dual power box
installation
The installation is complete.
If you are installing a power extension kit, refer to the HP
BladeSystem p-Class Power Extension Kit Installation
Instructions
to complete the installation.