HP BladeSystem c3000 Enclosure and c3000 Tower Enclosure Maintenance and Service Guide

Removal and replacement procedures 32
To remove the component:
1. Press inward near the top of the CD/DVD-ROM drive.
2. Remove the drive.
To replace the component, reverse the removal procedure.
SATA CD/DVD-ROM drive
IMPORTANT: If you are servicing a c3000 tower enclosure with the optional security panels
installed, these security panels must be removed before beginning this procedure.
To remove the component:
1. Remove the front cage (on page 43).
2. Pull on the latch to release the drive.