HP BladeSystem c3000 Enclosure and c3000 Tower Enclosure Maintenance and Service Guide

Removal and replacement procedures 34
Half-height or full-height blade
CAUTION: This procedure provides instructions for replacement of a failed part only. To change
the configuration of components, see the appropriate HP BladeSystem c-Class enclosure setup
and installation guide.
To remove the component:
1. Identify the proper half-height or full-height blade in the enclosure ("Device bay numbering" on page
70).
2. Back up all data.
3. Power down the half-height or full-height blade ("Power down the server blades or workstation blades"
on page 30).
4. Remove the blade:
o Half-height blade