HP BladeSystem c3000 Enclosure and c3000 Tower Enclosure Maintenance and Service Guide

Removal and replacement procedures 36
3.
Remove the mini-divider or divider:
o c3000 mini-divider:
Push the divider toward the back of the enclosure until the divider drops out of the chassis.
o c3000 divider:
a. Push the divider toward the back of the enclosure until it stops.
b. Slide the divider to the left to disengage the tabs from the wall.
c. Rotate the divider clockwise.
d. Remove the divider from the enclosure.
To replace the component, reverse the removal procedure.
Onboard Administrator tray assembly
To remove the component: