HP BladeSystem c3000 Enclosure and c3000 Tower Enclosure Maintenance and Service Guide

Removal and replacement procedures 39
2.
Remove the Onboard Administrator blank.
CAUTION: For best cooling practices, do not operate the enclosure for extended periods with
more than one component or blank removed. When removing an active component, replace it
with a blank.
To replace the component, reverse the removal procedure.
HP BladeSystem Insight Display
To remove the component:
1. Power down the enclosure ("Powering down the enclosure" on page 31).
2. Remove the Onboard Administrator tray assembly (on page 36) or the DDR2 Onboard Administrator
module (on page 37).
o Onboard Administrator tray assembly: