HP BladeSystem c3000 Enclosure and c3000 Tower Enclosure Maintenance and Service Guide

Removal and replacement procedures 48
5.
Remove the Onboard Administrator tray assembly (on page 36) or the DDR2 Onboard Administrator
module (on page 37).
6. Remove the front cage ("Front cage" on page 43).
7. Remove the SATA CD\DVD-ROM drive ("SATA CD/DVD-ROM drive" on page 32).
8. Disconnect the media board cable from the midplane.
9. Remove the T-15 Torx screw securing the media board cable.
10. Remove the media board cable.
11. Remove the T-15 Torx screws securing the media board to the front cage.
12. Remove the media board.
To replace the component, reverse the removal procedure.