HP BladeSystem c3000 Enclosure and c3000 Tower Enclosure Maintenance and Service Guide

Removal and replacement procedures 51
6.
Remove the front cage ("Front cage" on page 43).
WARNING:
To reduce the risk of personal injury or equipment damage, at least two people are
needed to safely move the enclosure or the front cage.
7. Remove the six T-15 Torx screws that secure the handle.
8. Remove the handle. Repeat for the second handle, if needed.
To replace the component, reverse the removal procedure.
Top bezel (c3000 tower enclosure)
Remove the component as indicated:
To replace the component, reverse the removal procedure.