HP BladeSystem c3000 Enclosure and c3000 Tower Enclosure Maintenance and Service Guide

Component identification 75
Item Description Status
1
Reset button —
2
USB connector —
3
Health LED Green = Normal
Red = OA firmware issue. See the HP Onboard
Administrator User Guide on the HP website
(http://www.hp.com/go/bladesystem/docum
entation).
4
Active LED
Green = Primary OA module
Off = Standby OA module
5
UID LED Blue = Activated
Off = Deactivated
6
Serial connector —
Enclosure rear components
Item Description
1
KVM module bay
2
Interconnect bay 1
3
Fan bays ("Fan bay numbering" on page 76)
4
Interconnect bay 2
5
Enclosure link-down port
6
Enclosure link-up port
7
Onboard Administrator 1/iLO port
8
Onboard Administrator 2/iLO port (reserved for future
use)
9
Power supply bays ("Power supply bay numbering" on
page 77)
10
Interconnect bay 4