HP BladeSystem c3000 Enclosure Quick Setup Instructions

4
Item Name Description
20*
Printed installation
instructions for blades,
options, and
interconnects
The printed installation instructions
21* Installation checklist
A checklist that guides you through
installation of the enclosure and its
components
* Not shown
Installing the enclosure
WARNING: Because the fully-populated enclosure can
weigh up to 131.5 kg (290 lb), remove all components
and the front cage from the enclosure before removing the
enclosure from the pallet to reduce the risk of personal
injury when moving the enclosure.
CAUTION: Do not touch or bump front cage connector
pins when installing the front cage into the enclosure.
CAUTION: Be sure the hinges are completely open
before installing the front cage into the enclosure. Failure
to do so can cause damage to pins and connectors.
1. The enclosure can be installed in a rack or rack-free environment.
Select the proper location based on requirements detailed in the
HP BladeSystem c3000 Enclosure Setup and Installation Guide.
2. With the enclosure still on the pallet, remove all components from
the front and rear of the enclosure, and then remove the front
cage.