HP BladeSystem c3000 Enclosure Quick Setup Instructions

7
o If you are installing a full-height device, remove the
half-height divider.
o If you are installing a full-height device in bays 3/7 and two
half-height devices in bays 4/8, install the mini divider.
6. Remove the connector covers.
7. Install the server or storage blades.
NOTE: If you plan to install four HP Active Cool 100
Fans, you can install up to two full-height blades or up to
four half-height blades. For full-height blades, populate
device bay 1, and then populate device bay 2. For
half-height blades, populate the device bays in the
following order: 1, 2, 5, 6.
If you plan to install six HP Active Cool 100 Fans, you can
install the blades in any configuration.
8. Install device bay blanks into any unused device bays.