HP BladeSystem c3000 Tower Enclosure Setup and Installation Guide

Installing components 28
c.
Slide the mini divider locking tab up to lock it.
3. Install the half-height divider:
a. Slide the half-height divider locking tab down.
b. Align the three tabs on the left edge of the half-height divider with the openings in the enclosure,
and then rotate the half-height divider counter-clockwise.
CAUTION: Be sure that all five tabs (three on the left edge of the divider and two on the right
edge of the divider) are fully inserted before sliding the divider forward to complete the
installation. Failure to do so can cause damage to the server blade connectors during
installation.