HP BladeSystem c3000 Tower Enclosure Setup and Installation Guide

Installing components 29
c.
Pull the half-height divider forward until it stops and slide the half-height divider locking tab up to
lock it.
Installing fans
NOTE: The HP BladeSystem c3000 Tower Enclosure is shipped with four HP Active Cool fans
and supports up to six fans. Install fans based on the number of blades installed:
• For one to four half-height blades or one to two full-height blades, install four fans in bays
2, 4, 5, and 6.
• For additional blades, install six fans using all bays.
For more information, see "Fan bay numbering (on page 15)."
1. Turn the handle counterclockwise to the unlock position, and pull the fan or fan blank from the
enclosure.
2. Slide the fan into the enclosure until it locks in place.