HP BladeSystem c3000 Tower Enclosure Setup and Installation Guide

Installing components 30
NOTE: When installing a fan in the left column of fan bays, orient the fan so that the LED is in
the upper right corner of the fan housing. When installing a fan in the right column of fan
bays, orient the fan so the LED is in the lower left corner of the fan housing.
To remove a fan, turn handle the counterclockwise to the unlock position, and pull the fan out of the
enclosure.
Installing an HP BladeSystem c3000 KVM module
You can use the optional HP BladeSystem c3000 KVM module to connect the enclosure to a KVM. You
can also connect the c3000 KVM module to the HP Server Console Switch or HP IP Console Switch using
the HP USB Interface Adapter.
To use the c3000 KVM module, you must have HP BladeSystem Onboard Administrator version 2.10 or
later installed. For more information on using the c3000 KVM module software, see the HP BladeSystem
Onboard Administrator User Guide.