HP BladeSystem c3000 Tower Enclosure Setup and Installation Guide

Using the HP BladeSystem Insight Display 48
To identify the enclosure, the rear enclosure UID light and the background of the Insight Display are
illuminated blue when the enclosure is powered on initially. The Installation Wizard automatically turns on
the enclosure UID at the beginning of the installation and turns it off after the installation is complete.
The Enclosure Settings screen (on page 55) is the first screen to display. The background color is blue
because the enclosure UID is active when this screen displays.
1. Review each setting on the Enclosure Settings screen (on page 55) for accuracy.
2. To change any value, navigate the cursor to the menu option to be edited, and press the OK button.
3. Change the setting to the appropriate value, navigate the cursor to Accept, and press the OK button
to return to the Enclosure Settings menu. Repeat this step until all options on the Enclosure Settings
menu are accurate.
TIP: Select the ? icon to access detailed help information about each setting or topic.
TIP: Within any menu option, navigate the cursor to What is This, and press the OK button to
view additional information about each setting, option, or alert.
4. When all settings on the Enclosure Settings menu are accurate, navigate the cursor to Accept All,
and press the OK button to accept the current settings.
You can change the following options in the Enclosure Settings screen:
Power Mode—The default setting is AC Redundant. The following selections are valid:
o AC Redundant
o Power Supply Redundant