HP BladeSystem c3000 Tower Enclosure Setup and Installation Guide

Using the HP BladeSystem Insight Display 52
9.
If no errors are detected, the rear enclosure UID turns off, and the Insight Display screen illuminates
green. Press the OK button to return to the Main Menu. Enclosure and blade hardware setup and
configuration is complete.
If errors are detected, the Insight Display screen illuminates amber, and the Health Summary screen
displays. See Insight Display errors (on page 62) for more information on troubleshooting
configuration and installation errors.
IMPORTANT: All configuration errors prevent the operation of the enclosure and should be
corrected immediately.
10. Open a browser and connect to the active Onboard Administrator module using the Onboard
Administrator IP address that was configured during the Insight Display installation wizard process.
11. Enter the user name and password from the tag supplied with the Onboard Administrator module to
access the remote Onboard Administrator web interface and complete the Onboard Administrator
first time installation wizard.
Accessing the HP BladeSystem Insight Display
1. Push on the exposed end of the Insight Display for display access.