HP BladeSystem c3000 Tower Enclosure Setup and Installation Guide

Using the HP BladeSystem Insight Display 55
Select View Alert and press the OK button to display the errors.
Select Details to view the details of the error.
Enclosure Settings screen
The Enclosure Settings screen displays the following setting information about the enclosure:
• Power Mode setting
• Power Limit setting
• Power Savings mode setting
• Active and Standby OA IP addresses
• Enclosure Name
• Rack Name
• DVD Drive
• Insight Display PIN#
NOTE: The DVD Drive setting can attach or detach a CD or DVD loaded in the optional
c3000 enclosure DVD drive to any or all blades in the enclosure. This feature can be used to
install an operating system or software on the blade(s). If the optional DVD drive is not present,
an external HP USB DVD drive can be used with this feature instead.
TIP: Set a PIN to protect the enclosure settings from changes.
Navigate the cursor to a setting or to the ?, and press OK to change the setting or get help on that setting.
Enclosure Info screen
The Enclosure Info screen displays information about the enclosure, including:
• Active OA IP address
• Active OA Service IP address
• Current health status of the enclosure