HP BladeSystem c3000 Tower Enclosure Setup and Installation Guide

Using the HP BladeSystem Insight Display 57
To view information about the blade, select Blade Info and press the OK button.
To view the ports used by a specific blade, select Port Info and press the OK button.
On the full-height blade shown below, there are two embedded NICs. The other interconnect bays are
empty. The two embedded NICs are connected to particular port numbers on the interconnect modules.
Turn Enclosure UID On/Off screen
The main menu option displays "Turn Enclosure UID Off" when the enclosure UID is active, and displays
"Turn Enclosure UID on" when the enclosure UID is off.