HP BladeSystem c3000 Tower Enclosure Setup and Installation Guide

Planning the installation 6
Item Name Description
9 HP Active Cool fan (quantity as ordered) A fan used to cool the components installed in
the enclosure
10 Enclosure/Onboard Administrator link
module
The module used to provide enclosure-link
connectivity and Onboard
Administrator/iLO/interconnect management
access
11 Module blank A mandatory cover installed in the reserved
module bay
12 HP BladeSystem Insight Display A display that provides information about the
health and operation of the enclosure
13 Interconnect module (quantity and type as
ordered)
Any of several components, such as pass-
throughs or switches that enable
communication between the blade and the
enclosure
14 Onboard Administrator tray A removable tray that houses the Onboard
Administrator module and Insight Display
15 Onboard Administrator module The module used to manage the components
installed in the enclosure. The module is built
into the Onboard Administrator tray for a
single Onboard Administrator.
16 DVD drive An optional DVD drive for the enclosure
17* Onboard Administrator blank A mandatory cover installed in any unused
Onboard Administrator bay
18* Interconnect blank A mandatory insert installed in any unused
interconnect bay
19* Documentation CD A CD containing detailed documentation
about using the enclosure
20* SmartStart CD A CD containing SmartStart software that
optimizes single-server setup
21* Printed installation instructions The printed installation instructions for blades,
options, and interconnects
22* Installation checklist A checklist that guides you through installation
of the enclosure and its components
* Not shown
Installation environment requirements
The HP BladeSystem c3000 Tower Enclosure (referred to as the enclosure) is designed to be used in a
rack-free environment. The following conditions must be met when performing a rack-free installation:
• A fully populated enclosure can weigh up to 153.7 kg (338.9 lb). The object supporting the
enclosure must be able to withstand this weight.
• The enclosure should be supported by a sturdy, flat surface.