HP BladeSystem Onboard Administrator User Guide

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 189

• Enclosure Event 0x36: Inadequate Power or Cooling

• Enclosure Event 0x40: Interconnect Device Status Changed

• Enclosure Event 0x41: Interconnect Device Reset

• Enclosure Event 0x42: Interconnect Device UID Status Changed

• Enclosure Event 0x43: Interconnect Device Inserted

• Enclosure Event 0x44: Interconnect Device Removed

• Enclosure Event 0x45: Interconnect Device Information Changed

• Enclosure Event 0x46: Interconnect Device Health LED Status Changed

• Enclosure Event 0x47: Interconnect Device Thermal Status Changed

• Enclosure Event 0x48: Interconnect Device CPU Fault

• Enclosure Event 0x49: Interconnect Device Power Mode Changed

• Enclosure Event 0x50: Enclosure Demonstration Mode

• Blade Event 0x100: Blade Device Status Changed

• Blade Event 0x101: Blade Device Inserted

• Blade Event 0x102: Blade Device Removed

• Blade Event 0x103: Blade Device Power State Changed

• Blade Event 0x104: Blade Device Power Management Changed

• Blade Event 0x105: Blade Device UID Status Changed

• Blade Event 0x106: Blade Device Shutdown

• Blade Event 0x107: Blade Device Fault

• Blade Event 0x108: Blade Device Thermal Status Change

• Blade Event 0x110: Blade Device Information Changed

• Blade Event 0x111: Blade Bay Management Processor Changed

• Blade Event 0x112: ILO Ready

• Blade Event 0x114: Keying Error

• Blade Event 0x115: ILO Has IP Address

• LCD Event 0x200: Display Changed

• LCD Event 0x201: Button Pressed

• LCD Event 0x202: Pin Information Changed

• LCD Event 0x203: User Note Information Changed

• LCD Event 0x204: Chat Requested

• LCD Event 0x205: Chat Response Sent

• LCD Event 0x206: LCD Display State Changed

• Enclosure Event 0x1001: Network Information Changed

• Enclosure Event 0x1002: SNMP Information Changed

• Enclosure Event 0x1003: System Log Cleared