Manualshelf

HP ProLiant WS460c G6 Workstation Blade with WS460c Graphics Expansion Blade Maintenance and Service Guide

ManualsBrandsHP ManualsComputer AccessoriesHP BLc3000 Enclosure with 4 AC Power Supplies 6 Fan Trial ICE License
41424344454647484950
Removal and replacement procedures 43
6.
Install the DIMM.
7. Install all DIMM baffles.
8. Install the access panel ("Access panel" on page 28).
If you are installing DIMMs in a mirrored or lock-step configuration, configure this mode in RBSU.
If necessary, reinstall the WS460c Graphics Expansion Blade and the access panel.
Heatsink blank
To remove the component:
1. Power down the workstation blade.
2. Remove the workstation blade (on page 27).
3. Remove the access panel ("Access panel" on page 28).
4. Remove the heatsink blank.