Manualshelf

HP ProLiant WS460c G6 Workstation Blade with WS460c Graphics Expansion Blade Maintenance and Service Guide

ManualsBrandsHP ManualsComputer AccessoriesHP BLc3000 Enclosure with 4 AC Power Supplies 6 Fan Trial ICE License
41424344454647484950
Removal and replacement procedures 46
6.
Remove the hard drive backplane.
To replace the component:
1. Install the hard drive backplane. Press down on the hard drive backplane retainer to seat the board.
2. Install the hard drives ("Hard drive" on page 39).
3. Install the hard drive blanks ("Hard drive blank" on page 39).
4. Install the access panel ("Access panel" on page 28).
5. Install the workstation blade.
Front panel/hard drive cage assembly
To remove the component:
1. Power down the workstation blade.
2. Remove the workstation blade (on page 27).