HP BladeSystem Onboard Administrator User Guide

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 255
Row Description
Minimum (Watts,
Btu/hr, or Amps)
This value shows the minimum power readings (Watts, Btu/hr, or Amps depending on
what you have selected) from the enclosure over the last 24 hour period. If the
enclosure has not been running for 24 hours, the value is the minimum of all the
readings since the enclosure was powered up.
Maximum (Watts,
Btu/hr, or Amps)
(Side A + Side B)
This value shows the maximum power readings (Watts, Btu/hr, or Amps depending on
what you have selected) from the enclosure over the last 24 hour period. If the
enclosure has not been running for 24 hours, the value is the maximum of all the
readings since the enclosure was powered up.
Present Power
This value shows the power being consumed by all devices in the enclosure.
Enclosure Power Detail
The Enclosure Power Detail table provides detailed information for each five minute sample period. Click
Date in the table heading to arrange the order of the detailed enclosure power information from present date
to oldest date or oldest date to present date.
Column Description
Date
Date the power reading sample was taken.
Time
Time the power reading sample was taken.
Peak (Watts, Btu/hr, or
Amps)
(Side A + Side B)
This value shows the maximum power readings (Watts, Btu/hr, or Amps depending on
what you have selected) from the enclosure over the last 24 hour period. If the
enclosure has not been running for 24 hours, the value is the maximum of all the
readings since the enclosure was powered up.
Min (Watts, Btu/hr, or
Amps)
This value shows the minimum power readings (Watts, Btu/hr, or Amps depending on
what you have selected) from the enclosure over the last 24 hour period. If the
enclosure has not been running for 24 hours, the value is the minimum of all the
readings since the enclosure was powered up.
Average (Watts,
Btu/hr, or Amps)
This value shows the average of the power readings (Watts, Btu/hr, or Amps
depending on what you have selected) from the enclosure over the last 24 hour period.
If the enclosure has not been running for 24 hours, the value is the average of all the
readings since the enclosure was powered up.
Cap (Watts, Btu/hr, or
Amps)
This value shows the maximum dynamic power cap readings (Watts, Btu/hr, or Amps
depending on what you have selected) from the enclosure over the last 24 hour period.
If the enclosure has not been running for 24 hours, the value is the maximum of all the
readings since the enclosure was powered up.
Derated (Watts, Btu/hr,
or Amps)
This value shows the derated power readings (Watts, Btu/hr, or Amps depending on
what you have selected) from the enclosure over the last 24 hour period. If the
enclosure has not been running for 24 hours, the value is the maximum of all the
readings since the enclosure was powered up.
Rated (Watts, Btu/hr, or
Amps)
This value shows the rated power readings (Watts, Btu/hr, or Amps depending on
what you have selected) from the enclosure over the last 24 hour period. If the
enclosure has not been running for 24 hours, the value is the maximum of all the
readings since the enclosure was powered up.
Power units
Select the appropriate value in which to display the power date from the menu.
Line voltage
Select the appropriate line voltage from the menu.