HP BladeSystem Onboard Administrator User Guide

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 275
Search context is also applicable to LDAP directory groups, which are useful when LDAP nested groups
are configured. When specifying the search context for an LDAP directory group, the exact context is
not required. For example, if a group's location is ou=OU2,ou=OU1,dc=hp,dc=com, the higher-level
search context ou=OU1,dc=hp,dc=com can be used to locate that group. This feature helps circumvent
the length limit of search contexts. For more information about nested groups, see "Directory Groups (on
page 279)."
Field Possible value Description
Directory Server Address
IPv4 Address:
###.###.###.### where ###
ranges from 0 to 255 or DNS
name of the directory server or
the name of the domain.
IPv6 Address:
####:####:####:####:###
#:####:####:####, where
#### ranges from 0 to FFFF. A
compressed version of the
same IPv6 address is also
supported.
The IP address or the DNS name or the name of
the domain of the directory service. This field is
required.
Directory Server SSL Port
1 to 65535 The port used for LDAP communications. Port
636 is the standard SSL LDAP port. This field is
required.
Search Context 1
All characters except "
(quotes), not to exceed 127
characters
First searchable path used to locate the user
when the user is trying to authenticate using
directory services. The path is also used to
search for a nesting LDAP group.
Search Context 2
All characters except "
(quotes), not to exceed 127
characters
Second searchable path used to locate the user
when the user is trying to authenticate using
directory services. The path is also used to
search for a nesting LDAP group.
Search Context 3
All characters except "
(quotes), not to exceed 127
characters
Third searchable path used to locate the user
when the user is trying to authenticate using
directory services. The path is also used to
search for a nesting LDAP group.
Search Context 4
All characters except "
(quotes), not to exceed 127
characters
Fourth searchable path used to locate the user
when the user is trying to authenticate using
directory services. The path is also used to
search for a nesting LDAP group.
Search Context 5
All characters except "
(quotes), not to exceed 127
characters
Fifth searchable path used to locate the user
when the user is trying to authenticate using
directory services. The path is also used to
search for a nesting LDAP group.
Search Context 6
All characters except "
(quotes), not to exceed 127
characters
Sixth searchable path used to locate the user
when the user is trying to authenticate using
directory services. The path is also used to
search for a nesting LDAP group.
• Use NT Account Name Mapping (DOMAIN\username)—Select this check box to enable NT name
mapping. This field enables users to log in by using the NT domain\username format. The Onboard
Administrator may be optionally configured to search the Directory Server Global Catalog and locate
the authenticated user information and associated authorized groups. The standard Directory Server
GC SSL Port is 3269. This field is optional, and if left blank, the global catalog is not used.