HP BladeSystem Onboard Administrator User Guide

First Time Setup Wizard 66
Column Description
Enabled
Enables EBIPA settings for the device bay. EBIPA settings for all device bays can be
enabled by selecting the check box next to Enabled in the heading row or individual
device bays can be selected by clicking the check box for that particular device bay.
EBIPA Address
The fixed IP address you want to assign to the device bay. Possible values are
###.###.###.### where ### ranges from 0 to 255.
Subnet Mask
Subnet mask for the device bays. Possible values are ###.###.###.### where ###
ranges from 0 to 255.
Gateway
The fixed gateway IP address that you want to assign for the device bays. Possible
values are ###.###.###.### where ### ranges from 0 to 255.
Domain
Domain name for the device bays. Possible values are a character string with a
maximum of 64 characters, including all alphanumeric characters, the dash (-), and the
period (.)
DNS Servers
IP addresses for primary, secondary, and tertiary DNS servers. Possible values are
###.###.###.### where ### ranges from 0 to 255.
Autofill
Assigns consecutive IP addresses for the selected device bays below in the device list.
Click the autofill down arrow to assign the IP addresses.
Current Address
The current IP address of the device bay.
First Time Setup Wizard EBIPA IPv6 Screen
IMPORTANT: Do not use the fe80::/10 prefix when configuring EBIPA-assigned addresses, as
this network prefix is reserved for link local SLAAC addresses.