Intel Server Management (ISM) Installation and User's Guide, Version 5.5.5 - HP Carrier-Grade Server cc3310

Intel Server Management (ISM) Installation and User's Guide
Client SSU (CSSU) Details
Message Description
Check Security Sensor at <server>
Check Physical Container Global Table at <server>
System chassis front or side panel has been opened,
or it was open and has been closed.
Check Cooling Fan at <server> System fan has stopped or restarted.
Check Memory Array at <server> A memory error was reported.
Check Host Adapter at <server> A SCSI board reported a state change.
Check Logical Unit at <server> A SCSI device reported a state change.
Check Controller Information at <server> A RAID controller reported a state change.
Check Physical Drive Information at <server> A RAID drive reported a state change.
Check Processor at <server> A processor error was reported.
Check Power Unit Global Table at <server> A power unit redundancy state change was reported.
Check Power Supply at <server> A power supply failed.
Check Indication Control Group at <server> The LAN Adapter reported a threshold crossing.
Check Storage Device Events at <server> A SCSI device reported a state change.
Check Storage Controller Events at <server> A SCSI controller reported a state change.
Check System Slot at <server> A PHP slot reported a state change.
E-mail Messages
The Platform Instrumentation software on the server determines the content and subject line of e-mail
messages generated by an e-mail alert. Messages have the following form:
Check Voltage Probe at server <server-name>
Event Type:Status Changed from OK to Upper Non-Critical
Event Severity:Non-Critical
Component:Intel Corporation, Baseboard
Group:Voltage Probe
Instance:4
Configuring E-mail Alerts
To use e-mail alerting, e-mail capability is required on your network. Use PIC to configure the Email Alert
settings for each managed server.
Use the Alert Actions tab for individual sensors to set an Email Alert notification for that sensor.
NOTE Don’t select a shut-down/power-control action for events where you specify e-mail notification.
If you select e-mail notification and a shutdown option for the same event, the e-mail will not
be sent because the operating system will be shut down.