Intel Server Management (ISM) Installation and User's Guide, Version 5.5.5 - HP Carrier-Grade Server cc3310

Intel Server Management (ISM) Installation and User's Guide
Serial Data and the Command Line Interface
power
Syntax:
power {on [-c]} | {off [-f]}
Description:
Initiates a power-up or power-down sequence on the managed server. By default, this command attempts a
graceful shutdown of the operating system before executing the IPMI power-off command. To perform a
graceful shutdown, the Platform Instrumentation (PI) software must be installed on the server.
Options:
[-c] Switches the session to Serial over LAN mode after successfully executing the IPMI power-on
command.
[-f] Forces a power off without attempting a graceful shutdown.
power -s
Syntax:
power -s
Description:
Displays the current power state of the managed server.
reset
Syntax:
reset [-f] [-c]
Description:
Performs a platform reset. By default, this command attempts a graceful shutdown of the operating system
before executing the IPMI reset command. To perform a graceful shutdown, the Platform Instrumentation
(PI) software must be installed on the server.
Options:
[-c] Switches the session to Serial over LAN mode after successfully executing the IPMI reset
command.
[-f] Forces a reset without attempting a graceful shutdown.
sel
Syntax:
sel [-c] [-num] [-f filename] [-h filename]