AC089A Cable Management Bracket Installation Guide (supersedes ProLiant DL380 G4 Cable Management Bracket Installation Guide)

Figure 1-1 AC089A Cable Management Bracket
1
2
The bracket is adaptable for use with several models of HP Cluster Platform and might also
be applicable in other cable management applications (consult your hardware installation
documentation). The following bracket features are called out in Figure 1-1:
1. Mounting holes, which you use to attach the bracket to the rack.
2. The mounting face, which contains three mounting slots. You attach cable management
straps to this part of the bracket.
• One 3.5-inch (89-mm) fabric strap (Figure 1-2) that mounts on the bracket.
Figure 1-2 Fabric Strap
2
1
3
The strap has a hook-and-loop fabric closure (callout 1) and a metal D-ring (callout 2) that
is designed to secure a single interconnect cable. The strap is secured to the bracket through
a metal grommet (callout 3).
• The fasteners that are specified in Table 1-1.
Table 1-1 Fasteners
DescriptionTorqueFormatSizeQty.
Machine screw, pan-head. For use the 10-32 cage nuts.30 in/lbPhillips
(Posidrive)
10-32 x .375-inch2
Machine screw, pan-head. For use with the cage nut
to attach the strap to the bracket.
30 in/lbPhillips
(Posidrive)
M6 x 16 mm1
Cage nut for M6 x 16-mm screw.N/ASquare nutM61
Cage nut for 10-32 x .375-inch screw.N/ASquare nut10-322
• Packaging and documentation.
To prevent screws from becoming loose because of vibration, HP recommends that you use a
torque screwdriver set to the torque specifications given in Table 1-1. Contact your HP sales
representative if any parts are missing.
1.5 Kit Contents 7