Cisco SFS 7012D InfiniBand Interconnect Cable Management Brackets Installation Guide

Figure 1-1 Cable Management Brackets
1
2
3
The following list corresponds to the callouts shown in Figure 1-1.
1. Cable management bracket – right side
2. Cable management bracket – left side
3. Right side cable management bracket top and side views (left side cable management
bracket opposite).
• The fasteners that are specified in Table 1-1.
Table 1-1 Fasteners
DescriptionTorqueFormatSizeQty.
Cage nut for M6 x 16mm screw.N/ASquare nutM6 cage nuts4
Machine screw, Phillips head. For use with the cage
nut.
30 in/lbPhillips
(Posidrive)
M6 x 16mm
screws
4
• Packaging and documentation.
To prevent screws from becoming loose because of vibration, HP recommends that you use an
adjustable torque driver set to the torque specifications given in Table 1-1. Contact your HP sales
representative if any parts are missing.
1.5 Required Resources
To install the kit, you require the following resources:
• Tools:
— Screwdriver, #2 (medium) Phillips.
— Cage-nut insertion tool (shipped with the rack) or a flat-bladed screwdriver.
— Marker pen or masking tape.
• Resources: A sample cable of the type used by the system interconnect.
• Environment:
10 Preparing for Installation