Cisco SFS 7024D InfiniBand Interconnect Cable Management Brackets Installation Guide

Figure 1-1 Cable Management Brackets
1
The following list corresponds to the callout shown in Figure 1-1.
1. Cisco SFS 7024D InfiniBand Interconnect Cable Management Brackets
• The fasteners that are specified in Table 1-1.
Table 1-1 Fasteners
DescriptionTorqueFormatSizeQty.
Cage nut for M6 x 16mm screw.N/ASquare nutM6 cage nuts8
Machine screw, Phillips head. For use with the cage
nut.
30 in/lbPhillips
(Posidrive)
M6 x 16mm
screws
8
• Packaging and documentation.
To prevent screws from becoming loose because of vibration, HP recommends that you use an
adjustable torque driver set to the torque specifications given in Table 1-1 “Fasteners”. Contact
your HP sales representative if any parts are missing.
1.5 Required Resources
To install the kit, you require the following resources:
• Tools:
10 Preparing for Installation