HP 16/18-Port Cable Management Kit Installation Guide (538272-doc)

◦ Marker pen or masking tape
◦ Diagonal cutting pliers
• Resources: Cables of the type used by the HP BladeSystem c-Class InfiniBand switch.
1.6 Prerequisites
Before you begin to mount the bracket:
• Follow the usual cable-handling precautions for InfiniBand cables, see the InfiniBand switch
manual that came with your switch.
• Ensure you know how to plug in the InfiniBand cables, as described in the InfiniBand switch
manual that came with your switch.
• Read the rack installation instructions for the c-Class enclosure.
• Obtain the set of cabling tables required for your HP InfiniBand network.
Important:
Do not secure the enclosure into the rack before you begin the bracket installation. You must be
able to access the rear (inward) face of the rack columns.
6 Preparing for Installation