HP ProCurve 2610 Series Rail Kit Installation Guide (508783-doc)

Figure 1-3 Bracket Orientation
5
4
4
3
2
6
1
Figure 1-3 shows the following components and their orientation to the HP ProCurve 2610 Series
switch.
1. Left mounting bracket.
2. Right mounting bracket.
3. The ProCurve 2610 series switch.
4. Support bracket mounting position. See Figure 2-1 for more information on where and how
to mount the support bracket.
5. M6 screws.
6. M4 screws.
1.8 Installation Preparations
Prepare for the installation as follows:
1. Ensure that the cluster is shut down and powered off so that you can perform the installation.
2. Prepare a suitable work surface, such as a table, on which you can safely arrange the
unpacked parts and have room to attach the rail brackets to the HP ProCurve 2610 Series
switch.
3. Unpack the HP ProCurve 2610 Series switch and lay it on a flat, level surface with its ports
facing toward you.
10 Preparing for Installation