HP ProCurve 2610 Series Rail Kit Installation Guide (508783-doc)

Figure 2-4 HP ProCurve 2610 Series Switch Attached to Front of the Rack
7. Tighten all of the screws to the recommended torque (see Table 1-1 for the recommendations).
Note:
HP recommends that you use an adjustable torque drive set to the torque specifications
provided in Table 1-1.
The assembly and installation is completed as shown in Figure 2-5.
Figure 2-5 HP ProCurve 2610 Series Switch Installed in an HP 10000 Series Rack
29
13