HP ProCurve 2610 Series Rail Kit Installation Guide (508783-doc)

• The fasteners specified in Table 1-1.
Table 1-1 Fasteners
DescriptionTorqueFormatSizeQuantity
Rack-mount bracket mounting screw (flat-head).15 in-lbPhillips
(Posidrive)
M4 x 0.7 x 8
mm screw
8
Cage nut for M6 x 16 mm machine screw. A round
nut that clips into the rack column.
N/AN/AM6 cage nut8
Rack-mount bracket mounting screw.30 in-lbPan Head XRCSM6 x 16 mm
screw
10
• Packaging and documentation.
• The bracket hardware shown in Figure 1-1 and Figure 1-2.
Figure 1-1 HP ProCurve 2610 Series Rail Kit Hardware
1
5
3
4
2
2
The following list corresponds to the callouts shown in Figure 1-1:
1. Left mounting bracket
2. Two support brackets
3. Right mounting bracket
4. Flat-head M4 screws
5. Pan-head M6 screws
8 Preparing for Installation