HP ProLiant DL16x Server Cable Management Bracket Installation Guide (498442-doc)

1 Preparing for Installation
1.1 Audience
This guide is intended for HP service representatives and other persons trained to install hardware
options in HP 10000 Series Racks. Such persons are expected to understand the hazards of working
in this environment and to take suitable precautions to minimize danger to themselves and
others.
1.2 Documentation Resources
You can download the documentation for components referenced in this installation guide from
the following locations:
• HP 10K Series Racks:
http://h18004.www1.hp.com/products/servers/proliantstorage/racks/10000series/documentation.html
• HP Cluster Platform:
http://www.hp.com/techservers/clusters/xc_clusters.html
• HP ProLiant Servers:
http://h10010.www1.hp.com/wwpc/pscmisc/vac/us/en/en/proliant/proliant-dl.html
1.3 Kit Description
The cable management bracket described in this manual is designed to align and support cables
that lead from HP ProLiant DL160 G5 and DL165 G5 servers to a leaf switch or spine interconnect.
The bracket provides strain relief, ensures the correct bend radius for the cables and provides
cable routing and cable management.
1.4 Kit Contents
The kit contains the following components:
• The cable management bracket shown in Figure 1-1.
6 Preparing for Installation