HP ProLiant DL16x Server Cable Management Bracket Installation Guide (498442-doc)

Figure 1-1 Cable Management Bracket
1
2
3
4
The cable management bracket can be used in several models of the HP Cluster Platform
and might be adaptable for other cable management applications (consult your hardware
installation documentation). The following list describes the callouts shown in Figure 1-1:
1. Cable management bracket
2. Five inch strap mounting hole (one on each end of the bracket) used to clip the five inch
strap for vertical routing of the cables in the cabinet.
3. The mounting face, which contains three mounting slots. Attach the 3.5 inch fabric
straps to this part of the bracket.
4. Cable management bracket mounting hole (one on each end of the bracket)
• Two 3.5 inch fabric straps (Figure 1-2)
Figure 1-2 3.5 Inch Fabric Strap
1
3
2
The following list describes the callouts shown in Figure 1-2:
1. Fabric closure
2. D-ring
3. Metal grommet used to mount the fabric strap to the cable management bracket
• One 5.0 inch fabric strap
1.4 Kit Contents 7