Integrity rx2600 Cable Management Tray Installation Guide

3. The cable management tray. The two mounting holes adjacent to callout 3 are
the locations of the eight-inch and 13-inch straps.
4. A captive slotted screw. The cable management tray installs on the end of each
rack-mounted server’s rail kit. The rail kit contains a threaded insert which
accepts this captive screw.
1.6 Resources
To install the kit, you require the following resources:
• Tools:
- A 6-inch long #2 (medium) Phillips (Posidrive or cross-point) screwdriver.
- A 6-inch long flat-bladed screwdriver.
• Environment:
- A work surface adjacent to the rack.
- The rack is tall, and you might not be able to work comfortably on the
topmost installations without a stable work platform or step stool.
Preparing to Install the Kit 1-3