Integrity rx2600 Cable Management Tray Installation Guide

2
Installing the Kit
2.1 Installing the Cable Management Tray
Install the cable management tray as follows:
1. Mount the tray on the end of the rail as shown in Figure 2-1:
Figure 2-1: Mounting the Cable Management Tray on the Rail
XC-CMT-002
View towards the rear of the rack
a. Position the cable management tray on the end of the rail, as shown
in Figure 2-1.
b. Use a flat-bladed screwdriver to secure the captive screw to the rail’s
threaded insert.
2. Attach the 5-inch strap as follows:
Installing the Kit 2-1