Myrinet Interconnect Rack Kit Installation Guide

Myrinet Interconnect Rack Kit Installation
Guide
1 Audience
This guide is intended for HP service representatives and other persons trained
to install hardware mounting options and system components in the HP 10642
rack. Such persons are expected to understand the hazards of working in this
environment and of taking suitable precautions to minimize danger to themselves
and to others.
2 Documentation Resources
You can download the documentation for components referenced in this installation
guide from the following locations:
• HP 10642 rack:
http://h18004.www1.hp.com/products/servers/proliantstor-
age/racks
(Select the menu option titled 10000-series rack and open the Documentation
option on the web page menu.)
• HP Cluster documentation:
http://docs.hp.com/linux/onlinedocs/4807/index.html
3 Verifying the Kit Contents
The kit contains the following components:
• A pair of rails that you mount on the columns of the rack.
• A pair of left and right retainer brackets that you mount on the Myrinet
chassis. These brackets slide onto the rails.
• The fasteners, as specified in Table 1.
Table 1: Rail Kit Fasteners
Qty Size Type Torque Description
12
M6 x 16 mm Machine
screw
30 in/lb Longer Phillips (Posidrive) pan-head.
Use with cage nuts.
12
M6 Nut N/A Cage nut for rack column square holes. Use
with M6 x 16-mm machine screw.
4
6-32 x .375 in Machine
screw
30 in/lb Small pan-head screw used to attach the
retainer bracket to the interconnect chassis.
4
M6 x 12 mm Machine
screw
30 in/lb Shorter Phillips (Posidrive) pan-head used
to lock the retainer bracket to the rail.
• Packaging and documentation.
Contact your HP sales representative if any parts are missing.
Myrinet Interconnect Rack Kit Installation Guide 1