ProCurve 5406zl CX4 Cable Management Brackets Installation Guide

2.2 Removing the Interconnect for Servicing
Bring the component to an appropriate state for removal, and put the rack cabinet into a safe
and stable state for component removal. You must ensure that you can reach the component
easily and handle it safely. Remove the interconnect as follows:
1. Switch off the power supply from the rack's power distribution unit and disconnect the
interconnect's power cable(s).
2. Disconnect and remove each network cable until all networking ports are unplugged. When
disconnecting the cables, ensure that you do not bend them more than the recommended
bend radius. The cable specifications are provided in the documentation for your cluster
type.
3. Remove the cable management brackets by reversing the installation procedure described
earlier in Chapter 2.
4. Slide the interconnect all the way out of the rack, as described in the documentation for the
interconnect rack kit.
2.2 Removing the Interconnect for Servicing 13