ProCurve 6400 CX4 Cable Management Kit Installation Guide (5991-7987)

columns of the HP 10000 Series Rack. The following list describes the callouts shown in
Figure 1-1:
1. Cable management bracket (two brackets of the same type are included in each kit).
2. The mounting face, which contains three mounting slots. Attach the 3.5–inch fabric
straps to this part of the bracket.
3. Cable management bracket mounting holes.
4. 5-inch strap mounting hole used to clip the 5-inch strap for vertical routing of the cables
in the cabinet.
• Eight 3.5–inch fabric straps, as shown in Figure 1-2:
Figure 1-2 3.5–Inch Fabric Strap
1
3
2
The following list describes the callouts shown in Figure 1-2:
1. Fabric closure.
2. D-ring.
3. Metal grommet used to mount the fabric strap to the cable management bracket.
• Two 5–inch fabric straps, as shown in Figure 1-3:
Figure 1-3 5–Inch Fabric Strap
1
2
The following list describes the callouts shown in Figure 1-3:
1. Fabric closure.
2. Mounting clip used to clip the strap to the cable management bracket.
• The fasteners that are specified in Table 1-1.
1.4 Kit Contents 7