ProCurve 6400 CX4 Cable Management Kit Installation Guide (5991-7987)

2 Installing the Cable Management Kit
Chapter 2 includes the following sections:
• Installing the Cable Management Bracket in the Front of the Rack (Section 2.1)
• Installing the Cable Management Bracket in the Rear of the Rack (Section 2.2)
• Installing the 3.5–Inch Straps (Section 2.3)
• Installing the 5–Inch Straps (Section 2.4)
• Cable Routing Examples (Section 2.5)
2.1 Installing the Cable Management Bracket in the Front of the Rack
Figure 2-1 shows the correct orientation of the cable management bracket in the front of the rack.
Figure 2-1 Cable Management Bracket Orientation (Front of Rack)
1
3
6
5
4
2
7
The following list describes the callouts shown in Figure 2-1:
1. HP ProCurve 6400cl switch
2. Right side slide rail
3. Front right rack column
4. Cable management bracket
5. cl module
6. Mounting screws and cage nuts (quantity four each)
7. Direction of view looking in from the front of the rack
2.1 Installing the Cable Management Bracket in the Front of the Rack 9